MIPA P 99 2K PE-Universal body filler is a body filler and putty with adhesion on steel plates, zinced plates, aluminium, tinned surfaces, wood and GRP. Short drying time and easy sandability are further characteristics of this premium product.
 
Colour
Beige
 
Technical information
Mixing ratio - Hardener by weight 100 : 2
Pot life - 3 - 4 min with Mipa Härter P at 20 °C
Drying time - 20 °C = 20min – 60 °C = 5min
VOC Regulation - EU limit value for this product (category B/b): 250 g/l This product contains max. 6 g/l of VOC.
 
Directions for use
The substrate must be clean, dry and free from grease. Sand surfaces slightly. Remove not cured old paintwork and priming coats. Do not apply on thermoplastic or acid products (Reaktionsprimer). Mix well the body filler material with the hardener. Do not use more than 3% of Härter P! Under- or overdosage of hardener may cause spotting in the finishing paint layer. Clean and degrease the whole surface to be painted with Mipa Silikonentferner before every operation. De-rust defective spots to bare metal and dry sand with sanding paper P 80 / 150. After drying, use sanding paper P 150 / 240 for dry sanding. Sand the entire surface with dry sand paper P 240 / 360 to a matt finish before applying filler. In case of filling work on non-ferrous metals (e.g. aluminium, zinced surfaces) it is possible to apply a priming coat with Mipa EPPrimer-Surfacer to ensure an optimal adhesion before applying the body filler. Do not overcoat without having isolated the surface with Mipa 1K or 2K filler. In order to improve the corrosion protection, e.g. when restoring vintage cars, prime with Mipa EP-Primer-Surfacer (see technical data sheet of Mipa EP-Primer-Surfacer). Body filler can only be dry sanded.