Mipa 4+1 Acrylfiller HS has very good filling properties and is very easy to sand. This filler can be used as compact as well as high-build filler.
Mipa 4+1 is also suitable to fill partial areas (Spot repair) without sinkage or visible marks in the outer rim.
• Easy to sand and gives perfect gloss hold out
• Super high build, opacity and filling power
• Fast drying
• Use with H5 extra fast or H10 fast hardener
• 4 - 1 Mixing Ratio
• German made
 
Technical Information
• Prime beforehand bare metal surfaces with a Mipa adhesion promoter (e.g. Mipa Rapidprimer, Mipa Aktivprimer or Mipa WBS 1K-Grundierfiller).
• Small iron and steel surfaces which are not larger than a hand can be directly recoated.
• In case of one-layer topcoat use sanding paper P 400 for dry sanding or P 600 for wet sanding. In case of a two-layer topcoat we recommend to use the sanding paper P 500/ 600 for dry sanding and P 800/ 1000 for wet sanding.
• Do not apply on thermoplastic substrates.
• The substrate must be clean, dry and free from grease. Sand surfaces slightly. Remove not cured old paintworks and priming coats.