3M 05098 1K Acryl Red Glazing Putty Stopper Tube
 
Product Description
3M Acryl Putty restores smooth surfaces by filling small pinholes, scratches, stone chips and other minor blemishes in automotive and marine finishes. This acrylic putty offers easy sanding, smooth spreading and low shrinkage.
 
Red Putty has a 2 minute work time and 20 minute sanding time. For Faster drying use 3M™ Green Putty PN 05096
 
Features
Single component
Air dry chemistry
Simple application 
 
Product Uses
Repair of minor surface imperfections prior to top coat applications. 3M™ Acryl-Red Putty works best when applied over primer or polyester body filler, it may also be applied over clean and sanded painted surfaces. For professional use only. Not intended for retail sale. 
 
Directions for Use
Do not apply when ambient temperatures are below 55ºF or above 110ºF. Use in a well ventilated area away from sparks or open flame.
For best results Apply only over clean sanded primed surfaces. (Use compressed air to remove any dust contamination).
Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application.
Allow to dry for 15 minutes at 72°F prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures.
Re-clean surface prior to priming or top coating. (Follow paint manufacturer’s recommendation for priming and top coating).